Close
Since 2004, Eukrea has developped a strong expertise for hardware and embedded linux development on ARM cores.
2011
- public launch of our Freescale i.MX51 based modules and devkit
- delivery of the valvometer project supported by the Regional Council of Aquitaine
- custom developments :
- based on i.MX27 (with u-boot, linux 2.6 and custom drivers + complete BSP)
- based on TI OMAP3730 (full hardware, software & casing design of an industrial PDA integrating wifi, bluetooth, camera, display, 2.4GHz RF, GPS, RFID, battery, u-boot, Linux 2.6, custom drivers and full Android 2.3 BSP)
- trainings : Linux on Freescale i.MX25, Linux on Atmel AT91SAM9G20, FreeRTOS on STM32
- hiring of a new enginer
- Turnover : ~ 370 k€
2010
- development of a range of compatibles modules based on Freescale i.MX25 / i.MX35 / i.MX/51 and the associated devkit
- public launch of our Freescale i.MX25 and i.MX35 based modules and devkit
- start of the valvometer project supported by the Regional Council of Aquitaine
- custom developments :
- based on i.MX27 (with u-boot, linux 2.6 and custom drivers + complete BSP handling decoding of 4 simultaneous H.264 streams)
- based on i.MX25 (low power, CAN 2.0B, bluetooth, GPRS/UMTS ...)
- based on STM32 (very low power, CAN 2.0B, SDCard, realtime OS FreeRTOS)
- trainings : Linux on Freescale i.MX27/25/35
- hiring of a new CAD technician
- Turnover : ~ 300 k€
2009
- launch of the new website
- development of a TI OMAP3530 based module and the associated devkit
- development of a Freescale i.MX515 module and the associated devkit
- public launch of our Atmel AT91SAM9260 AT91SAM9G20 bases module and devkit
- custom developments :
- based on i.MX27 (with u-boot, linux 2.6 and custom drivers + complete BSP)
- trainings : Linux on Freescale i.MX27
- Turnover : > 400 k€
2008
- development of a Atmel AT91SAMAT91SAM9260 / AT91SAM9G20 based module and the associated devkit
- public launch of our Freescale i.MX27 module and devkit
- custom developments :
- based on i.MX27 (with u-boot, linux 2.6 and custom drivers + complete BSP)
- trainings : Linux on Freescale i.MX27
- Turnover : 228 k€
2007
- new CAD acquired : Cadence Allegro 16
- development of a Freescale i.MX27 based module and the associated devkit
- custom developments :
- based on Atmel AT91RM9200 (u-boot, linux 2.6 and custom drivers + complete BSP)
- based on Intel IXP465 (u-boot, linux 2.6 and custom drivers + complete BSP)
- based on Cirrus EP9312 + embedded ETX x86
- based on Freescale i.MX27 (u-boot, linux 2.6 and custom drivers + complete BSP)
- support : embedded Linux support on Freescalei.MX27, Atmel AT92RM9200, Intel PXA, Freescale Coldfire MCF5208, Speex optimization for Coldfire MCF5208
- trainings : Linux on Atmel AT91RM9200, Linux on Freescale Power MPC5200
- Turnover : 248 k€
2006
- new offfices : 130 m2 in Pessac (10 minutes of Bordeaux's town center)
- capital increased to 40 000 €
- custom developments :
- based on Atmel AT91RM9200 (u-boot, linux 2.6 and custom drivers + complete BSP)
- based on Intel PXA270 (u-boot, linux 2.6 and custom drivers + complete BSP with HMI)
- analog power design for a ultrasound equipment for medical usage
- development and manufacturing of a GPS trackerwith GPRS data trasnmission + specific data aquisition
- support : embedded Linux supporrt on Intel PXA255, Intel IXP425 & Freescale Coldfire MCF5208
- training : Linux on Atmel AT91RM9200, uCLinux on Freescale Coldfire MCF5208
- Turnover : 182 k€
2005
- mise en vente de 2 modules et des kits de développement associés :
- CPUAT91 (Atmel AT91RM9200)
- CPUPXA255 (Intel PXA255)
- réalisations spécifiques :
- sur base Cirrus EP9312 (support u-boot, linux 2.6 et drivers spécifiques + BSP complet avec IHM)
- sur base Atmel AT91RM9200 (support u-boot, linux 2.6, drivers spécifiques + BSP & applicatifs complets)
- formations : Linux sur AT91RM9200
- support : interventions support Linux embarqué sur AT91RM9200 & PXA255
- CA : 183 k€
2004
- création de la société par 2 ingénieurs expérimentés en électronique et logiciel embarqué,
- SARL au capital de 10 000 €
- société hébergée dans la pépinière Bordeaux Unitec
- conception d'un module à base de OKI ML67Q503 et portage de u-boot & uClinux
- conception d'un module à base de Atmel AT91RM9200 et du kit de développement associé
- réalisations spécifiques :
- sur base Atmel AT91RM9200 (support u-boot & linux 2.6 + drivers spécifiques)
- CA (6 mois ) : 47 k€
